Title:Spiral grooved Winch Drum with Diameter of 570mm and 505mm
Technical Parameters: (All of the parameter should be according to
Processing equipment: CNC machining center
Rotation Direction: Left or Right
Wire Rope Diameter: 3 MM~190 MM
Product condition:New to order
About lebus grooved drum:
1.Integral rope groove drum: rope drums with grooves cut directly
into them (with or without bolted or welded flanges, as required).
2.The drum and flanges are connected by welding.
3.According to customers’ requirements, the flanges are either
welded or screw-bolted.
4.Groove geometry is determined by rope construction, diameter and
length, and by application. the drum has the required mounting
dimensions for the actual operating conditions.
The relevant product ------Lebus grooved sleeves
- the split-type lebus groove generally can be mounted on a smooth,
grooveless drum-for for retrofit or where the drum needs to be
- The split -type sleeve system consists of a pair of outer casings
that are bolted or assembled on a smooth light cylinder, so that
the outer surface of the cylinder becomes a grooved form, and the
split sleeve is composed of a spiral groove and a parallel groove,
and the groove is formed. The design conforms to the specific rope
structure, diameter and length.
Product detailed parameters:
1. Drum diameter
2. Width between flanges
3. Rope or cable diameter
4. Drum construction
5. Length of rope or cable to be accommodated
6. Distance to fixed sheave and position between flanges
7. Direction of wire rope entry
8. Outside diameter of flanges
9. Maximum operating load on rope or cable
10. A detailed drawing of the drum if possible
11. Type of rope entry through flange or through barrel
12. Radius barrel to flange
13. Any further information
Q1:What's your terms of payment?
A. T/T 50% deposit and 50% before delivery. we will show you the
photos of products and packages before your pay the balance.
Q2:What's your terms of delivery?
A. EXW, FOB CIF CFR etc
Q3:How about your delivery time?
A. Generally,it will take about 10-30 days after receive your
advance payment.The specfit delivery time depends on your
Q4:Can you produce according to the samples?
A. Yes, we can produce by your sample and technical drawings, we
can build mold and fixtures.
Q5: What's your sample policy?
A. We can supply sample, but the customer have to pay the sample
cost and courier cost.
Q6: Do you test all your goods before delivery?
A. Yes, we have 100% test before delivery.