Title:Glavanized Treatment Lebus Grooved Drum Used on Hoisting and
We can manufacture all sizes of drums. From now, we have finished
the drums from 50mm to 2000mm in diameter. And its length range is
from 100mm to 2000mm.
Some parameters for your reference: (Rapid customization need to
provide some parameters)
|Grooved drum diameter(mm)||80||150||300||500||800||1100|
|Width between the flanges flanges(mm)||150||280||300||460||750||1000|
|Number of layers||3||2||4||6||8||8|
Compared with cordless groove(smooth)drum and helical groove
drum,LBS groove has obvious advantages in multilayer spooling.
1. Ensure your wire rope spools smoothly onto and off the rope drum
under total control.
2. Make wire rope spooling uniform distribution of load between
3. Prevent cross & mess in the process of wire spooling.
4. Lower the rope damage and increase the service life of wire rope
by more than 500%.
Lebus grooved drum
The groove is cut directly into the body of the drum.(according to
customer‘s requirements.The flanges are either welded or
Split-lebus grooved sleeves(shell)
The whole lebus grooved drum is divided into the upper and lower
parts,which we call them lebus split-sleeves.
The sleeves are available a smooth drum or helical drums.
Integral rope groove drum: rope drums with grooves cut directly
into them (with or without bolted or welded flanges, as
required).Winch drum with flange, the LBS groove is cut directly
into the body of the drum, according to customers’ requirements,
the flanges are either welded or screw-bolted. groove geometry is
determined by rope construction, diameter and length, and by
application. the drum has the required mounting dimensions for the
actual operating conditions.